Part 2 - Building an £850 hatchback into a competitive race car.

  Näkymät 411,779

Bad Obsession Motorsport

4 kuukautta sitten

Part 2 of our series on building a car for the BRSCC's City Car Cup. After fitting the cage and other items from the mandatory parts list inside the car in part 1, we turn to the stuff we have to fit outside the car. The new bushes are fitted along with the sports exhaust. We then take an angle grinder to a sensitive component because reasons. Thanks for watching, we hope you enjoy it!
Race series details here: citycarcup.co.uk/
Merch at: badobsessionmotorsport.co.uk/shop/
Become a Patron at www.patreon.com/badobsessionmotorsport
Find us on Twitter @badobsessionmsp
Instagram @badobsessionmsp
And on Facebook too: @badobsessionmotorsport

Kommentteja
Jarl Green
Jarl Green 4 päivää sitten
The most precise and well engineered comedians on YT. Roflmao :-)
baby yoda partake
baby yoda partake 25 päivää sitten
Was this car a staff car on a submarine?
baby yoda partake
baby yoda partake 25 päivää sitten
Those discs don't belong on a 85000 mile road car 😂
extec101
extec101 Uukausi sitten
what is the spec of the rims?
Bofatutube
Bofatutube Uukausi sitten
Burn the brake fluid and interior? Did I hear that right?
Richard Schofield
Richard Schofield Uukausi sitten
I recently removed 2 trailing arms (4 bushes total) and took them to a local garage to have them removed. They looked at me funny and said to leave them with them so they could give me a quote. I thought it was odd to quote for 10 minutes work. Anyway they got back to me quoting me the book time and wanted £80. Out of principal I spent the next three hours with a hacksaw.
teamidris
teamidris 2 kuukautta sitten
Can’t you fit the gas powered kebab rotisserie in the escargo so you don’t need to leave the car unattended?
Watermelon kitteh
Watermelon kitteh 2 kuukautta sitten
“Gently tap” *proceeds to smash with hammer*
sergiovw1500
sergiovw1500 2 kuukautta sitten
23:20 Wheels?
dbForshort
dbForshort 2 kuukautta sitten
"Gently tap it off the upright" RIP EARDRUMS. Headphone users, be warned
George Tsiros
George Tsiros 2 kuukautta sitten
why are the front suspension held in place by friction? I understand the designers are certain it is more than enough to keep it there, but it still seems i dunno, risky?
Craig and Terri's Excellent Adventures
Craig and Terri's Excellent Adventures 2 kuukautta sitten
World of Tanks intro Music?
thfreakinacage
thfreakinacage 2 kuukautta sitten
Ok, I was starting to love this channel already, but after "special knob" that's it, I'm sold. New subscriber right here :P
\m/ MayheM \m/
\m/ MayheM \m/ 3 kuukautta sitten
I use the term "rocket surgery" just about everyday at work. (Honda auto parts consultant) The "Totalizer" sounds like a list of cars I've totaled. For the record: '91 Chevy S-10 '86 Chevy Cavalier '85 Toyota Tercel wagon '91 Pontiac Le Mans '91 Chevy Caprice (9C1) That's not counting just blown engines and trannys.
The Twissted
The Twissted 3 kuukautta sitten
11:20 please give that jack some wd40 😂
nightw4tchman
nightw4tchman 3 kuukautta sitten
6:18 "Oh err missus?"
captain chaos
captain chaos 3 kuukautta sitten
I see you have the original mk1 jack squeak. I just recently upgraded to the mk2 modified which has an extra creak sound just at the end of the stroke. But I think I starting to regret it.
Elli P
Elli P 3 kuukautta sitten
"They're NOT race mechanics - they're a couple of very naughty boys." (With apologies to Monty Python's 'Life of Brian'.)
Gregster
Gregster 3 kuukautta sitten
I 👍 this before I watched it because I loved episode one so much. This better not be as a disappointing as Matrix 2 🤨 Well done boys, really good production on this and so much info. Thanks
Stan Elder
Stan Elder 3 kuukautta sitten
Wot - didn't derust and repaint the subframes ????
Stephen Henderson
Stephen Henderson 3 kuukautta sitten
Ha. Bush
zeake13
zeake13 3 kuukautta sitten
The old saying. What does riding a fat girl and a scooter have in common? They are both fun but you don't want your friends to see you with either of them. .....If you take that and compare it to this "racecar" I'll take the fat girl.. .. . LOL Still going to watch for entertainment purposes. Like the squeaking jack......
चिंग चोंग पिंग पोंग
चिंग चोंग पिंग पोंग 3 kuukautta sitten
ring piece lol
Boy korolyuk
Boy korolyuk 3 kuukautta sitten
What bushing remover/installer kit is that? I cant find one that looks so nice
O Foufoutos
O Foufoutos 3 kuukautta sitten
dude the souind !!! its the opposite of the asmr thing ! its annoying !!!! alltogether ! the voice lvl the noise lvl omg !!!
fastfiatjames t
fastfiatjames t 3 kuukautta sitten
Its hurting my sole to see that sub frame go back in with out being rust protected
Brand
Brand 3 kuukautta sitten
now you can use your hammer so you can gently tap the upright off the strut. me: ok, gently tap it- hammer: WHAM WHAM WHAM Patrick: what; i thought you said firmly grasp it
Speedwelltuning
Speedwelltuning 3 kuukautta sitten
Are you going to take years to accomplish this??
Gary Combe
Gary Combe 3 kuukautta sitten
Fantastic video! Can I ask what is involved in aligning the subframe, before it can be tightened up?
Gary Combe
Gary Combe 3 kuukautta sitten
@Bad Obsession Motorsport Perfect. Thanks for the speedy response.
Bad Obsession Motorsport
Bad Obsession Motorsport 3 kuukautta sitten
Just measuring rear wheel centre to front wheel centre on both sides and making sure they're the same.
r l
r l 3 kuukautta sitten
Naughty.. should have used a fox wedge to open the strut clamps rather than knocking 7 bells out of them !! Pity you think tea is an acceptable drink URg !! Do enjoy your work tho..
karl winstanley
karl winstanley 3 kuukautta sitten
11:30 I take it you're monty python fans then? 😂
Matthew Jenkins
Matthew Jenkins 3 kuukautta sitten
Well I now feel confident upgrading any bush I find and applying the lube.
shauns auto repairs
shauns auto repairs 3 kuukautta sitten
Awesome..inspiring do it yourself racers everywhere
14725800369
14725800369 3 kuukautta sitten
Ok I rather spend the money for a yearly ticket of the Nürburgring although it became a rip off
Mark Marinič
Mark Marinič 3 kuukautta sitten
Why you didn’t paint subframe? :)
dcoog anml
dcoog anml 3 kuukautta sitten
Nik: "Must make an anti-squeak bracket for that jack lift after this cuppa..."
Da Rold Elio
Da Rold Elio 3 kuukautta sitten
This car ils filfthy, everything is rusted
dcoog anml
dcoog anml 3 kuukautta sitten
Should have got a stiffer antiroll bar
bocoy noiu
bocoy noiu 3 kuukautta sitten
I was trying to eat a kebab when you said "scabby old bush" cheers for that!
bcvbb hyui
bcvbb hyui 3 kuukautta sitten
This is my new favorite series
Anonymous Albatross
Anonymous Albatross 3 kuukautta sitten
nice one!
bcvbb hyui
bcvbb hyui 3 kuukautta sitten
Should have got a stiffer antiroll bar
RWL2012
RWL2012 3 kuukautta sitten
Why do some people call eBay "fleabay"...?
dcoog anml
dcoog anml 3 kuukautta sitten
All hail the twatting stick
GarryOzols
GarryOzols 3 kuukautta sitten
The "Mingles with Jingles" opening music is giving me confusions and makes my head have a bad. Apart from that, nice work there.
bocoy noiu
bocoy noiu 3 kuukautta sitten
Holy moly, those brakes are crusty.
bcvbb hyui
bcvbb hyui 3 kuukautta sitten
plenty of use out of Carol Voorderman before she went floppy"
sehhi vooty
sehhi vooty 3 kuukautta sitten
Holy moly, those brakes are crusty.
jawzzo
jawzzo 3 kuukautta sitten
Me: this could be something i could see myself doing its not too expensive 850 pound ca- Totaliser: Nope
jawzzo
jawzzo 3 kuukautta sitten
@sehhi vooty i mean i cant argue its good value, just way out of my budget for some fun
sehhi vooty
sehhi vooty 3 kuukautta sitten
EX for $30. That's a deal imo, considering the hours and loads of wasted energy some people spend futzing with those things.
Kieran Miller
Kieran Miller 3 kuukautta sitten
These episodes are coming so quickly youtube didn't even put the series in my recommended until ep. 3 came out! Good luck guys, and thanks for helping us get through this 😊
dcoog anml
dcoog anml 3 kuukautta sitten
I assumed you were joking when you said you needed to remove the wiper to get at the suspension.
Danny Thomas
Danny Thomas 3 kuukautta sitten
What’s going on with the mini celica gents? Very keen to see that thing shift
bcvbb hyui
bcvbb hyui 3 kuukautta sitten
Nik: "Must make an anti-squeak bracket for that jack lift after this cuppa..."
UPbuild
UPbuild 3 kuukautta sitten
Another cracking episode, really enjoying the new series 👍👍
Davey JDM yO!
Davey JDM yO! 3 kuukautta sitten
Having been on track with these sure footed little things, they look like great fun. Hardly having to brake and cocking a wheel at every opportunity 😍
Scott Pea
Scott Pea 3 kuukautta sitten
I was hitching a hay hauler to a truck one day and called in a turkey with the squeaky jack lol.
Second Stage
Second Stage 3 kuukautta sitten
weekly uploads? what is going on!!!
AR-Singh
AR-Singh 3 kuukautta sitten
What’s the gloves you guys use while working on the cars?
k3rn3lkill3r
k3rn3lkill3r 3 kuukautta sitten
I assumed you were joking when you said you needed to remove the wiper to get at the suspension.
yigit aslanturk
yigit aslanturk 3 kuukautta sitten
This is my new favorite series
das uberkät
das uberkät 3 kuukautta sitten
All hail the twatting stick
ɑʟpʜɑ ɱɑсʜɪиɑ
ɑʟpʜɑ ɱɑсʜɪиɑ 3 kuukautta sitten
Garage near me removes and presses these bushings in for something like $20-$40 depending on how many it is. They did both control arms and subframe on my 2005 Civic EX for $30. That's a deal imo, considering the hours and loads of wasted energy some people spend futzing with those things.
ɑʟpʜɑ ɱɑсʜɪиɑ
ɑʟpʜɑ ɱɑсʜɪиɑ 3 kuukautta sitten
Holy moly, those brakes are crusty.
Frane Gorjanc
Frane Gorjanc 3 kuukautta sitten
The "special knob" comment killed me :D Keep up the fantastic work guys - you're the best!
CactusLife
CactusLife 3 kuukautta sitten
2:15 this is irresponsible and awful for the enviroment, please dispose of these things in the correct way.
moo Nine Seven
moo Nine Seven 3 kuukautta sitten
Jingles? Is that you ?
sehhi vooty
sehhi vooty 3 kuukautta sitten
Nik: "Must make an anti-squeak bracket for that jack lift after this cuppa..."
Ian P
Ian P 3 kuukautta sitten
Going well then! brscc.co.uk/brunning-claims-victory-for-bad-obsession-motorsport-in-citycar-cup-at-silverstone/
npx20
npx20 3 kuukautta sitten
more Escargot please
Sush Mass
Sush Mass 3 kuukautta sitten
Project binky ??????? When ??????
sehhi vooty
sehhi vooty 3 kuukautta sitten
I’m honestly curious why you didn’t take this car through a good pressure wash before disassembly. Seems that would minimize the amount of crud you have to deal with.
CM West
CM West 3 kuukautta sitten
A BOM video without 1 bracket being fabricated? Heresy I say!
Erik Johansson
Erik Johansson 3 kuukautta sitten
Next on Bad Obsession: We buy 300 OEM con-rods and pistons and find the lightest ones to legally lighten the other ones to that weight. Later we also get 59 cylinders heads to find the best casting!
Chakradhar A
Chakradhar A 3 kuukautta sitten
Amazing videos demonstrating that "anything worth doing is worth over-doing!" Thank you and keep 'em coming. I have 1 request though... Considering how much welding and fabrication goes on in your builds. it would be great if you could make videos specific to these 2 topics showing us your techniques
Greg Wayne
Greg Wayne 3 kuukautta sitten
24:18 Well that's a new one on me. "Moll" or "Mull" "Mole" Grips?? UK for "Vise Grips" eh?
abbsnn cose
abbsnn cose 3 kuukautta sitten
jhopes voice is honey.
Egg
Egg 3 kuukautta sitten
Gently does it Also can the totaliser show a comparison between your build and a sim build - as far as you can compare :)
aola wili
aola wili 3 kuukautta sitten
why are you burning the interior and oil.... what about the polar bears!!!
p kerit
p kerit 3 kuukautta sitten
So you guys have 3 projects going???
aola wili
aola wili 3 kuukautta sitten
seeing so many parts assembled Dry made me wince a bit but this seems like a good break from Project Brackety
jeremysaise
jeremysaise 3 kuukautta sitten
There is a severe lack of getting the funk out....
Michael Nash
Michael Nash 3 kuukautta sitten
Just watched latest episode of Wheeler Dealers. Just makes me realise how brilliant these guys are and how false Mike Brewer and his tame (faux) mechanic Ant is.
rich miller
rich miller 3 kuukautta sitten
possibly the world's best motor modification channel.....cancel that, this IS the world's best motor mod. channel.......
Bad Obsession Motorsport
Bad Obsession Motorsport 3 kuukautta sitten
That's too kind. Thank you.
Alberto Favalelli
Alberto Favalelli 3 kuukautta sitten
Loved the "Psicose" moment!! 🚿🔧
Grant Cowie
Grant Cowie 3 kuukautta sitten
No copper grease was harmed during the making of this video 🙃
MikeZ32TT
MikeZ32TT 3 kuukautta sitten
Nice
Jason Shelly
Jason Shelly 3 kuukautta sitten
i kinda feel like nick knows more than you did at his age,,, and i kinda feel like youre a shit boss....hold your boys up, this shouldnt have to be explained....
Bad Obsession Motorsport
Bad Obsession Motorsport 3 kuukautta sitten
WTAF are you talking about Jason?
Jason Shelly
Jason Shelly 3 kuukautta sitten
also, i love the content but stop narrating, this isnt planet earth.....teach us something
Chad Geidel
Chad Geidel 3 kuukautta sitten
I’m honestly curious why you didn’t take this car through a good pressure wash before disassembly. Seems that would minimize the amount of crud you have to deal with.
Fearless Fosdick
Fearless Fosdick 3 kuukautta sitten
Use your angle grinder to cut a slot in the anti-tamper screw and remove it with a flat screwdriver.
TheMessiah
TheMessiah 3 kuukautta sitten
Oh come on. Two episodes and not a single bracket has been made ? I feel let down :-(
Pawel P
Pawel P 3 kuukautta sitten
Guys. That was AMAZING!!! Now I can buy the car, the kit and make my own daily shopping racer. Yeey
TheSp4ceman
TheSp4ceman 3 kuukautta sitten
where's the funk lads ??
Woodgate425
Woodgate425 3 kuukautta sitten
Excellent!
Colin scutt
Colin scutt 3 kuukautta sitten
seeing so many parts assembled Dry made me wince a bit but this seems like a good break from Project Brackety
Bad Obsession Motorsport
Bad Obsession Motorsport 3 kuukautta sitten
Dry?
No Hax Just GT
No Hax Just GT 3 kuukautta sitten
why are you burning the interior and oil.... what about the polar bears!!!
James Sutherland
James Sutherland 3 kuukautta sitten
I think a podcast by these two wouldnt go amiss
K0nst4nt1n
K0nst4nt1n 3 kuukautta sitten
I knew this was a racing car when i first saw the racing one arm wiper blade design as all the le mans cars use that.
doliio volay
doliio volay 3 kuukautta sitten
nice video but i wouldn't exactly be saying your burning the old interior as its illegal to burn such items
Cole Pearson
Cole Pearson 3 kuukautta sitten
This is a great watch, honestly, but... Where's BINKY?!
doliio volay
doliio volay 3 kuukautta sitten
Loving this series so far - it's going some way to fill the cavernous void in my heart that only a Binky update will ultimately fill 👌
sirkastic
sirkastic 3 kuukautta sitten
car suck. why do you bother
Bagdadsky_Hornik
Bagdadsky_Hornik 3 kuukautta sitten
it is small, but it is not a mini.
Kevin Boughen
Kevin Boughen 3 kuukautta sitten
I've just realised there won't be any more brackets for Binky. The guys always said they didn't want to damage the paint finish trying to fit something afterwards.....crying noises...
mikosoft
mikosoft 3 kuukautta sitten
After watching these I have a feeling I can build a race car.
MrBenski81
MrBenski81 3 kuukautta sitten
Glad this one popped up on my recommended list! Subbed
USMC03-1408
USMC03-1408 3 kuukautta sitten
Is it next week yet?
Al Man
Al Man 3 kuukautta sitten
OUCH!!!!!! compared to Binky these videos give me whip lash. That's the politically correct kind of lash! Seriously thinking of asking the guys to playback in quarter speed, so they go at a more gentlemanly speed!
Carstuff111
Carstuff111 3 kuukautta sitten
You guys freaking rock!!! I love this kind of stuff so much. And, I am betting with all the work done, it will be a fun little car :)
Ed Wilson
Ed Wilson 3 kuukautta sitten
I'd love to get into racing and this seems like a pretty great way to do it! Would the car be UK road legal/ MOT safe after all the mods?
dasginganinja
dasginganinja 3 kuukautta sitten
Is the "Moose Trained by" an old callout to Monty Python?
John Poyser
John Poyser 3 kuukautta sitten
Yes. The credits from Monty Python & the Holy Grail. ( Moose bites can be pretti nasti)
A51Jeremy
A51Jeremy 4 kuukautta sitten
I've never seen you channel before but now im fully subscribed and loving this !! cant wait for more
Bad Obsession Motorsport
Bad Obsession Motorsport 4 kuukautta sitten
Thank you.
Andy Glastonbury
Andy Glastonbury 4 kuukautta sitten
In these difficult and trying time, you provide genuine entertainment and knowledge. Respect 👍
liam rees
liam rees 4 kuukautta sitten
this is amazing.
Shauka Hodan
Shauka Hodan 4 kuukautta sitten
Loving this series so far - it's going some way to fill the cavernous void in my heart that only a Binky update will ultimately fill 👌
Part 3 - Building an £850 hatchback into a competitive race car.
25:15
Part 1 - Building an £850 hatchback into a competitive race car.
28:30
Godzilla vs. Kong - Official Trailer
2:25
Warner Bros. Pictures
Näkymät 35 milj.
Teflon Brothers x Pandora - I Love You (Lyric Video) // UMK21
3:12
Illusions of Time
31:08
Vsauce
Näkymät 5 milj.
Part 4 - Building an £850 hatchback into a competitive race car.
25:05
Project Binky - Episode 15 - Austin Mini GT-Four - Turbocharged 4WD Mini
35:53
How To: Build a Clio Cup Series Race Car
46:08
Renault Sport UK
Näkymät 368 t.
Godzilla vs. Kong - Official Trailer
2:25
Warner Bros. Pictures
Näkymät 35 milj.
Teflon Brothers x Pandora - I Love You (Lyric Video) // UMK21
3:12
Illusions of Time
31:08
Vsauce
Näkymät 5 milj.
The Worst Excavator Recovery Of My Career
41:10
MACHINE WAGON - Angelica Larsson
13:27
Angelica Larsson
Näkymät 106 t.
SURAYO OO LA OGOLAADAY ...
13:51
Fatuma Baraanbur Channel
Näkymät 47 t.
Uudet tilat, Keski-Korpi Motorsport
10:23
Keski-Korpi Motorsport
Näkymät 18 t.