Howie Did It - Toyota E154F Gearbox Strip and Rebuild

  Näkymät 301,711

Bad Obsession Motorsport

8 kuukautta sitten

In episode 31 of Project Binky, we briefly showed the old Toyota Celica transmission being cleaned and rebuilt. This is the long version.
Mechanix gloves now selling on our website: badobsessionmotorsport.co.uk/product-category/mechanix/
Become a Patron at www.patreon.com/badobsessionmotorsport
Find us on Twitter @badobsessionmsp
Instagram @badobsessionmsp
And on Facebook too: @badobsessionmotorsport

Kommentteja
Elli P
Elli P 6 päivää sitten
I'm a special tool: a talk wench. [Torque wrench, in case you thought it was a typo.] But I do NOT make the noise...
Elli P
Elli P 6 päivää sitten
No doubt electric vehicles are the future (yawn) but I like to think that there will always be obsessed nutters in sheds and garages all over the world prepared to keep the old skills alive. Grease and oil and gears and plugs and pistons and skinned knuckles and kettles and tea and biscuits... Oh yeah. Exhibit A: the song 'Red Barchetta' by Rush. :-)
Jay Gee
Jay Gee 21 päivä sitten
I'm sorry but I can't understand why didn't you change the bearings after all that work, what was the point of rebuilding the transmission. Don't get me wrong, I highly respect your work and skill level, I am just puzzled
ukwrx
ukwrx 23 päivää sitten
Did you do anything to the gearsets. Degrease etc?
Mark Aldous
Mark Aldous 29 päivää sitten
Did you account for the 10mm socket at the end? 😁 excellent video, keep them coming and keep up the good work. By far my favourite FIpost channel!
Dave Lawrence
Dave Lawrence Uukausi sitten
I'm currently trying to put the gearbox back on the engine of my ST205, and I've now decided that removing the transfer box is going to make lfe a bit easier. This video is very well done, thank you!
Barry Britcher
Barry Britcher Uukausi sitten
If loctite is anaerobic , why doesn't it solidify in the container. Always bugged me.
Motormania
Motormania Uukausi sitten
hey buddy, is the spline count for the Transfer case to the prop-shaft same for all generation GT4 ?
daszieher
daszieher 2 kuukautta sitten
Tappy-tap-tap!
Elli P
Elli P 2 kuukautta sitten
Yeah, transmission. You're so dirty. And I've got ALL the spanners. You like that, don't you. Who's the daddy, eh? WHO'S THE DADDY -
BeeClean ltd
BeeClean ltd 2 kuukautta sitten
V
Tom Oakhill
Tom Oakhill 2 kuukautta sitten
43:50 I love seeing gears! They are so beautiful. What wonderful engineering. It is a good thing that Nik has to struggle to get the gears to mesh. You do not want too much play.
Tom Oakhill
Tom Oakhill 2 kuukautta sitten
LOL. At 24:05 Nik says, "...needs a special tool, which is not available, so I had to make one. But will it work?" Ha, ha, ha. I have not watched Nik try his hand-made tool yet, but I am going to predict that the answer is "yes."
Bloo Aloo
Bloo Aloo 2 kuukautta sitten
That was incredibly satisfying to watch.
IvelLeCog
IvelLeCog 3 kuukautta sitten
The chances of everybody here choosing a Toyota E15 gearbox when faced with the choice will probably increase thanks to this video. For me, it's like: Okay, I'll go get find an engine that fits this gearbox, and find a car to put it all in lol
michael terry
michael terry 3 kuukautta sitten
Seeing how clean all the little bits are makes me want to up my game. I NEED A VAPOR BLASTER.
Dean Mackenzie bell, dmb
Dean Mackenzie bell, dmb 3 kuukautta sitten
Takes a special man to make all these tools just to have a look in his gear box. Wish I lived in a time where actual mechanics worked not just fitters. Unfortunately a dying breed
69uremum
69uremum 3 kuukautta sitten
If you hold the special tool you made at 90deg to the lever wouldn't the torque value be the same or very close since you arent adding leverage.
Brian Juncher
Brian Juncher 3 kuukautta sitten
nice works geys greatings from denmark
Ropponmatsu2
Ropponmatsu2 3 kuukautta sitten
I hope Mechanix Gloves are paying you for this.....
R. Weaver
R. Weaver 3 kuukautta sitten
So disappointed when parts didn't come flying out as case was removed...
carl westernut
carl westernut 3 kuukautta sitten
What would you guys recommend for an engine swap for my 1984 ford kb laser Its running the E5 1.5litre 4speed
Brutus
Brutus 3 kuukautta sitten
Where is the video of rebuilding the transmission oilpump? =)
Pip
Pip 3 kuukautta sitten
Done with the care of an orthopedic surgeon ....
TheManLab7
TheManLab7 3 kuukautta sitten
58:09 I do love a nice innuendo 😊 My nan and grand use to have those curtains.
john beer
john beer 4 kuukautta sitten
I am rewatching this because i feel the need for some binky team
Tom Oakhill
Tom Oakhill 4 kuukautta sitten
I am amazed at just how much I enjoyed this. It was wonderful. Those gears are beautiful. The complexity of the "simple" gearbox is a sight to see. The culmination of centuries of gear making, starting with church clocks. Thank you Nik & Rich for taking the time to make this video.
bibliotek42
bibliotek42 4 kuukautta sitten
!!!
hootizzz
hootizzz 4 kuukautta sitten
Technical Question - Under the immense stress of such a delicate procedure, is it critical for the sanity of Nick's Mighty Mechanical Mind to use a 'Dusky Pink & Green' tablecloth as the backdrop to such an operation ??
Tom Kao
Tom Kao 4 kuukautta sitten
I NEED THEM BACKKKKK AHHHHHH
Nippon Fever
Nippon Fever 4 kuukautta sitten
Good Job. Thank you very much. Helped me a lot.
Rolf Ödin
Rolf Ödin 4 kuukautta sitten
At the start of this, I was wondering how long it would take for me to switch to some other video. And here I am, an hour later, with a smile on my face. Just could not stop watching. Should probably seek help...
Oce's Mekanics
Oce's Mekanics 4 kuukautta sitten
All the advanced metallurgy used to create this machines and a piece of wood is always used to massage parts into place.
simon lloyd
simon lloyd 5 kuukautta sitten
sweet jesus fekkin christ...it's like a Chinese puzzle.
Steve McIlroy
Steve McIlroy 5 kuukautta sitten
Ive had to watch this for the third time, as Im going cold turkey for another episode.
John Lomax
John Lomax 5 kuukautta sitten
Looks easy when you know what you are doing, I'm particularly impressed by his range of "knockometers"! Well done and well presented.
fZ57EWtAgkLzyQ2
fZ57EWtAgkLzyQ2 5 kuukautta sitten
Great documentation and presentation
Bryan Leverett
Bryan Leverett 5 kuukautta sitten
I bet 30 years ago some guys would have bought this video for $500
locom0nkey
locom0nkey 5 kuukautta sitten
This is freaking great! I'm contemplating the idea of swaping this into my Rav4 along with a 3S-GTE like Rav4GTT did. but I still have a lot to learn
Trooper73
Trooper73 5 kuukautta sitten
Have you painted Binky yet thats one thing im looking forward to unless you paint it in a boring colour like the engine.
63mrl
63mrl 6 kuukautta sitten
"Tappy-tap-tap" damn Canuck Ave influence across the pond.
auscurrymaster
auscurrymaster 6 kuukautta sitten
Not the first time he's removed spring clips, is it?
squidkid2
squidkid2 6 kuukautta sitten
No fair trying to blame it on "Howie". I know you guys were the one's that did it!
David Duffy
David Duffy 6 kuukautta sitten
So not funny, unsubscribed When you’re not trying too be funny the content is great. Don’t do your stupid voice overs.
lunarj73
lunarj73 6 kuukautta sitten
I work at a Toyota dealership and have put a 2nd gear in one and have seen the special tool for removing the bearings, I've also seen someone put 5th gear on and then seen the bearing plate on the side😁
papakazas
papakazas 6 kuukautta sitten
-1:48. LMAOL
Ezra Getachew
Ezra Getachew 6 kuukautta sitten
Hey! Do you have the SS2RX24009008765AVD56787プーラー tool? and the other guy says What? lol
1chish
1chish 6 kuukautta sitten
@55:47 what was the part number for the nut used as a spacer? I don't seem to have that on my E154F gearbox .... Got to love gold though.
scheissestick
scheissestick 6 kuukautta sitten
Nothing like that sound. You're hammering on a case you're trying to crack and you hear that hollow sound start!
Blat Virtual
Blat Virtual 6 kuukautta sitten
Incredible, like a swiss watch!, @B.O.M. Did you clean or replace the oil pump? and no change to fresh gloves after gasket sealing goo application?
gaz ferg
gaz ferg 6 kuukautta sitten
all that tappity tap reminded me of benny hill hitting the little bald guy on the head.
RobHTech
RobHTech 6 kuukautta sitten
good vid. very detailed. I just don't really get it. Did you "Rebuild" it just to clean it? What is new?
FAHID AHMED
FAHID AHMED 6 kuukautta sitten
Nice I like videos 👌👌👌👍👌
Nova Avon
Nova Avon 6 kuukautta sitten
I have now watched two videos on your guys channel im convinced that we must be friends
JB Lewis
JB Lewis 7 kuukautta sitten
I just kept thinking about what it must have been like building those gearboxes on the production line.
ToolkiT73UK
ToolkiT73UK 7 kuukautta sitten
the beauty of watching this (beyond geeky entertainment value) is you learn stuff, even basic stuff. Like how you remove a retainer clip easily using pliers and a hammer.. had to do that and after watching this, it was a lot easier :) keep up the good work!
rustandoil
rustandoil 7 kuukautta sitten
I'd have been happier to see s bit of oil applied to the bearings on assembly 👍
Alex Buckland
Alex Buckland 7 kuukautta sitten
Hiya guys hope you don't mind me asking but what is your day jobs and profession cos you are both good at what you do in the video's and it seems that you have a whelth of knowledge in multiple aspects of the engineering, fabrication and mechanics trades, anyway I'm enjoying your channel keep up the great work and looking forward to seeing the new project's and how Binky progresses
Hammy
Hammy 7 kuukautta sitten
Are you geezers trying to get in on the ASMR trend?
Fred Nerk
Fred Nerk 7 kuukautta sitten
Although I respect these blokes, my real admiration is for the people who designed this stuff in the first place. Mechanical engineers are sorely under rated.
Ross Moore
Ross Moore 7 kuukautta sitten
Where is that amazing mini?!
Corn Hole
Corn Hole 7 kuukautta sitten
This is right up there with one of the best things I’ve ever seen on tv , watched it about 10 times now already and counting . Well done guys your work is an absolute joy to watch .
TheVet4id
TheVet4id 7 kuukautta sitten
If someone has Binky as a car in any video game I'm buying it.
J. L.
J. L. 7 kuukautta sitten
At 55:48 -re-installing the gear selector mechanism -whats' that extra nut underneath the bolt head? Bolt too long? At 3:10 when removing it I can see at least one of those bolts is shorter than the others. Related question: did you happen to weigh all the gearbox/diff hardware when you had it out? I've never done anything remotely like this and the sheer quantity of bolts is surprising.
hartley hare
hartley hare 7 kuukautta sitten
Does it really take over five months to paint a mini?
1BigBen
1BigBen 7 kuukautta sitten
@Bad Obsession Motorsport but it would be nice if Binky was getting the same type of Insane Paint Job as the AMMO Porsche 964 had fipost.info/show/videot/laSMk4CDkZ2bZ6I.html
Bad Obsession Motorsport
Bad Obsession Motorsport 7 kuukautta sitten
No.
Tortuga speed shop
Tortuga speed shop 7 kuukautta sitten
I need my monthly fix of bad obsession.... when will the next ep be coming out????
1BigBen
1BigBen 7 kuukautta sitten
indeed the shake is getting bad
anonymous George
anonymous George 7 kuukautta sitten
Ummm . . . shiny. Good.
Ralph Taylor
Ralph Taylor 7 kuukautta sitten
guys, any word on the next posting of the mini, or the bus.
cheewurz
cheewurz 7 kuukautta sitten
Purdy!!!
marcel caratus
marcel caratus 7 kuukautta sitten
Oooo, post a new video already!!!🥴🥴
James Foo
James Foo 7 kuukautta sitten
Nice to see it all go back together refurbed/cleaned. Nice middle ground between refurb vs crazy money and time renewing it all.
FULL THROTTLE
FULL THROTTLE 7 kuukautta sitten
Looking forward to the next vid guys, hoping the virus hasn't put things on hold too much...in saying that I've been watching it 6 years so whats another year or so till completion.
Rick H
Rick H 7 kuukautta sitten
Can someone tell me why this little car still is not painted? Its not like it is a big car. Is there still one bracket missing?
1BigBen
1BigBen 7 kuukautta sitten
it is getting same type of paint job as the AMMO Porsche 964 or the world has been under lockdown and binky may not have the first priority in the shop that it is at
1 2
1 2 7 kuukautta sitten
I want to see a backing up beeper on that Mini.
Barry Britcher
Barry Britcher 7 kuukautta sitten
Anything coming up?
T-baggins
T-baggins 7 kuukautta sitten
Best fab/engineering channel on pootube, keep up the awesome effort guys!
Terry Fleming
Terry Fleming 7 kuukautta sitten
What, no time for tea?
Emilio Murillo
Emilio Murillo 7 kuukautta sitten
just think when electrics take over, this video will be put in a museum and everyone will laugh and laugh and laugh
kennapop3
kennapop3 7 kuukautta sitten
If I watch this three more times will #32 be ready?
Brian A
Brian A 7 kuukautta sitten
You guys are going to piss off your mum for doing the reassembly on her kitchen table.
DonQuixotedeKaw
DonQuixotedeKaw 7 kuukautta sitten
Yep, I'm doubtless on a register.
markie harrison
markie harrison 7 kuukautta sitten
my eyes are bleeding!
Andrewmic
Andrewmic 7 kuukautta sitten
Ever heard the adage - if it ain't broke? Ringing at 110 db, especially at 30.50. The episode painfully reminds me of my Father and Brother rebuilding the latters Minor 1000 gearbox approx 50 years ago. On reasembly tested each gear selection - all ok - first road test, all went well untill the rear wheels locked up with the box selecting 2nd and 4th gears simultaneously...... off to the breakers for a correctly assembled gearbox!
Julian V.
Julian V. 7 kuukautta sitten
YEP.... I WAS WAITING FOR THIS MOMENT 🐦 🐦 🐦
KerissP
KerissP 7 kuukautta sitten
59:00 BigClive has a good Scottish word for this sort of fiddly work: footery. A good many years of knowledge and experience (and hours of editing) went into this seamless process. Great job, lads!
Colin Womble
Colin Womble 7 kuukautta sitten
Nearly a tube of locktight surely. Can't knock you for it thow, last thing you want is the vibes of the box loosening a couple eh! Great video.
Hojoz
Hojoz 7 kuukautta sitten
I love how you guys specified the special tools needed to dissasemble and assemble the gearbox
1147cc
1147cc 7 kuukautta sitten
cool... those are splash oil feeders at 48:16
Obiwan Riley
Obiwan Riley 7 kuukautta sitten
Why are there big nuts between gear selector and box?
miko foin
miko foin 7 kuukautta sitten
Just me that heard: "nice catch"
dolimi jotoo
dolimi jotoo 7 kuukautta sitten
that he had a cog left over, but youthful indifference meant that he tried it without the cog and it still worked perfectly.
SwiffMeister
SwiffMeister 7 kuukautta sitten
Maybe I missed it, but is there a reason that things were not made more complicated by installing a 6 speed?
miko foin
miko foin 7 kuukautta sitten
Careful work that is nicely done- as always. Thanks, guys.
Gareth - Part Time Farming
Gareth - Part Time Farming 7 kuukautta sitten
Is there an even longer version with the video of how the special tools were made?
dolimi jotoo
dolimi jotoo 7 kuukautta sitten
I want that torque wrench that goes, Bitti! Bitti! Bitti! Bitti... Beeep! Beeeeep!
Masso1973
Masso1973 7 kuukautta sitten
Nice work, any bolts left over?
abbsnn cose
abbsnn cose 7 kuukautta sitten
He's doing it like this is the 353rd one he's ever done.
Tas Michaelidis
Tas Michaelidis 7 kuukautta sitten
Scary that all this engineering is eliminated in an electric car.
mw3goy mw3goy
mw3goy mw3goy 7 kuukautta sitten
Tape tap tap I was wiring today and as I was cutting cables to length chucking to my self saying snipe snip snip
Donald Tavares
Donald Tavares 7 kuukautta sitten
45:37 Excitement
abbsnn cose
abbsnn cose 7 kuukautta sitten
Stunning! Thanks for the experience, loved every second of it! Couldn't have done it better! actually, never done it before! ;) I can't imagine the engineering that went into design
beshjs
beshjs 7 kuukautta sitten
Why did you need to take a dowel out of the gearbox?
Richard Anderson
Richard Anderson 7 kuukautta sitten
Why is that nut on one of the bolts on the gear selector housing at 59:55 ????? Was the bolt too long & you didn't think to saw off the excess ???? Makes the whole job look shoddy,unprofessional !!!!! Come on guys,you're better than that !!!!!
Bad Obsession Motorsport
Bad Obsession Motorsport 7 kuukautta sitten
Either that or the alternator bracket bolts there and the original bolts were too short so we plated longer bolts and used a nut to tighten the bolts up without them bottoming out in the blind hole until the sealant had gone off. Is that okay?
Darrell Bedford
Darrell Bedford 7 kuukautta sitten
I have watched this series from the beginning and have one question. WHO THE HELL IS REX HAMILTON AS ABRAHAM LINCOLN?
Best of Anime 2020
26:52
Gigguk
Näkymät 776 t.
Highlights Athletic Club vs FC Barcelona (2-3)
1:31
LaLiga Santander
Näkymät 1,6 milj.
Do You Love Me?
2:55
Boston Dynamics
Näkymät 27 milj.
Ultrasonic Obliterator at 170,000fps - The Slow Mo Guys
10:36
Howie Did It - An Experiment in 3D Printing
14:48
Bad Obsession Motorsport
Näkymät 252 t.
Howie Did It - Hydraulic Lifting Platform
45:13
Bad Obsession Motorsport
Näkymät 341 t.
Howie Did It - Machining the flexi-shaft auxiliary drive. Part 1
41:02
Chuck Modification to Reduce Overhang
30:54
Winky's Workshop
Näkymät 21 t.
Howie Did It - Machining the flexi-shaft auxiliary drive. Part 2
48:35
Gears! - But Were Afraid To Ask (MiniLathe)
29:02
This Old Tony
Näkymät 2,1 milj.
The Escargot - RV/Camper Car Transporter Conversion - Part 1
34:16
Bad Obsession Motorsport
Näkymät 572 t.
Best of Anime 2020
26:52
Gigguk
Näkymät 776 t.
Highlights Athletic Club vs FC Barcelona (2-3)
1:31
LaLiga Santander
Näkymät 1,6 milj.
Do You Love Me?
2:55
Boston Dynamics
Näkymät 27 milj.
Ultrasonic Obliterator at 170,000fps - The Slow Mo Guys
10:36
We Put A Snow Bike Kit on a Sport Quad!
22:11
Grind Hard Plumbing Co
Näkymät 571 t.
I Finally Bought an Electric Car...
16:19
Unbox Therapy
Näkymät 2,5 milj.